Wednesday, February 8, 2012

Bi-fold Wallet Tutorial

Pin It Now! I wanted a wallet that carried a lot of cards with no risk of them sliding out. As you can see, the card slots face inward, which means your cards will stay put as long as your wallet is closed. I promise it's a lot easier than it looks so bear with me. Here we go!

Disclaimer: I do not mind if you use this pattern for personal use, or even to sew and sell on a small scale. However, please do not sell the actual pattern for profit... it is for everyone to enjoy free of charge.

Materials:

Main Outer and Inner Pieces: cut two 9"x 5" rectangles (stabilize with fusible interfacing if using quilting cotton)

Inside Bill Lining pieces: cut two 9"x 4 1/2" rectangles (do not stabilize)

Tab: 3 1/2"x 3 1/2" square (stabilize with fusible interfacing if using quilting cotton)

Pockets: 5"x19"cut two (do not stabilize)

Note: you only need to use interfacing for quilting weight cottons. If you decide to use canvas or heavy weight fabric, forge ahead!

Here are your pieces. If you have a rotary cutter and mat, your pieces will look so much nicer than my sloppy scissor-cut pieces:


Make the tab. Stabilize with fusible interfacing. Fold in half and sew the top and side, leaving bottom open. Clip corners, turn right-side out, press and top stitch.

Note: If using a magnetic purse snap, attach before sewing tab.

Make the lining. Lay pieces right-sides together and sew sides and bottom, leaving 3" opening at bottom. Top is completely unsewn.

OPTIONAL: You may skip this step if you want a plain wallet. I embellished this one with ribbon. Lace would be adorable. Also, a quilted patchwork piecing would rock... piece together first then interface finished piecing.

Make the pockets.

Don't use a credit card. It will warp your card and flatten your numbers. Just take my word for it. I used a gift card. Never iron directly on the card.

Think of folding a paper fan... only it's off-set in its folds to create the staggered pockets.

I mostly just eye-balled this part.



Nice pockets. Now flip it over and trim off the excess. Each finished pocket piece should measure 4" x 5".

Now do it again for the other pocket piece.

Attach your pocket pieces to the inner wallet piece.

Quick view of where you should be:

Center and attach the tab.

Sew your outer wallet and inner pocket pieces together along sides and bottom.

You're sewing through some thick layers, so use a 1/2" seam allowance to make sure you catch everything. Then trim down as shown.

Sew lining to main wallet. Fold bottom of outer piece an inch so it'll fit in the lining pouch.

Sew around top opening. This is a bit awkward feeding through the sewing machine. Use a 1/2" seam allowance here as well.


Crisp corners of outer wallet well before stitching lining closed.

Work your magic with the iron and press those stubborn, thick seams. Top stitch around entire opening.

Give your wallet another good pressing and top stitch along the sides and bottom.

Attach snap. I have an industrial snap press, but you can use sew-on snaps or Velcro. If using magnetic purse snaps, you'll want to attach the snap piece to the tab before sewing the tab.


Enjoy!


141 comments:

Irina said...

Just what I needed! Thanks for sharing your tutorial, it's great and I'll give it a try.

Tricia said...

Thanks for the tutorial.

Corina said...

Great idea! Thanks for posting.

jabeybaby said...

Oh how love this little wallet! Thanks so much for sharing!

Janna said...

Your tutorials never disappoint!!! Thanks so much!

Anonymous said...

I have been looking for this exact type of wallet - THANK YOU so much for sharing!!! I can't wait to give it a try!
Jess

Unknown said...

Great tutorial! Now I know what to sew next!

http://instyleopedia.blogspot.in/
Follow. Comment. Share.

Cindy said...

I just got new fabric from Stampin' Up! and can't wait to try this! Thanks so much for sharing. (I saw this on Pinterest.)

Philip, Melissa, & Summer said...

Funny, I think I just saw this pinned on pinterest. Looks great.

mel@all.wrapped.up said...

Hi. This tutorial is amazing - it has very clear pictures and instructions. I have linked you on my blog: http://mel-allwrappedup.blogspot.com.au/p/link-love-to-amazing-free-craft.html.

mel@allwrappedup

Daisie said...

Perfect sized wallet for my needs. I have a coach one I use all the time, but it would be great to make a wallet to match all the bags and purses I make! Thank you so much!

Anonymous said...

Lovely! Thank you for taking the time to do this tutorial!

CriCri said...

I love it! It's fantastic! thank you very much for your good tutorial.
Kisses from Italy
CriCrilla

Angela said...

Super freakin' cute and a great tutorial! Thank you! :)

Anonymous said...

Great tutorial! I sew very little but I ma very confident that I could do also, your instructions are so easy to follow.
You could also add a zippered pocket on the other side for small change.
Thank you for sharing!
Antoinette

ksaldivar said...

What a wonderful tutorial and it is so much like the plastic hello Kitty wallets that I was addicted to that would always fall apart. Thank you for sharing

Carolyn said...

love this...and I have the same fabric to use when I make it..LOVE JOEL DEWBERRY

Anonymous said...

Thank you so much, great little last minute gift for my little sis!!

Rebecca @ Herons Crafts said...

Thanks for the great tutorial! This is definitely on my to do list!
Rebecca @ heronscrafts.blogspot.com

Cold Hands Warm Heart | Crafts said...

Wonderful tutorial! I featured you on my tutorial roundup! Thanks for sharing!

Caroline
Cold Hands Warm Heart Crafts
http://www.coldhandswarmheartcrafts.com/2012/05/tutorial-roundup.html

Becky said...

Wonderful tutorial!! I love this wallet and have been needing to make one this size :-) I have a quick question - if you choose to use a velcro closure, at which step would you sew that onto the outer piece? Thanks so much for posting!

Jodell said...

Hi Becky, I would add the velcro piece to the outer shell in the first step, after you stabilize it with interfacing (but before you sew it to the pocket piece). For the other velcro piece that goes on the tab, I would wait to sew that very last (after the wallet is finished). Happy sewing!

ShoeMonster said...

This looks amazing, can't wait to make it!

Kate the Great said...

Where can I buy this?

Beth Adams said...

Just stumbled upon your tutorial. From the bottom of my heart - thank you for sharing your talent and instructions. This is the first step-by-step tutorial I have found in my numerous searches.

Thank you

*katie said...

Love this! I think I found my weekend project :)

Christy said...

Thank you for posting this. It's just what I need. I just started sewing and your step by step instructions will totally help me.
On a side note I just wanted to add that I love the Boise Co-op and shop there weekly. :)

Tranae said...

Awesome project. I found your blog on pinterest. I'm a new follower

Anonymous said...

WHAT FUN! I just finished making my first one and can't wait to make another. Your instructions & pictures were perfect! The only change I made was attaching the tab to the right instead of the left side. Thank you so much for sharing your pattern!

shirley said...

great tutorial and wallet! I just made one out of scraps from a purse I made daughter. One suggestion- the snap should go on the out
side wallet piece before you put the lining in and sew. I should have thought of that. Oh well- now have a snapped-in lining! not bad for my first attempt.

Karen said...

I found this on a friend's pin and made one this evening. Turned out pretty good. I, too, have a snapped lining but that doesn't matter. Cute!

Anonymous said...

My wife is horrible with a sewing machine, I have been sewing ever since I was a private in the Army. This was one of the easiest tutorials to do with lots of room for error. Thanks for the post my wife loves Her new wallet.

Westcliffe Baroness said...

1/2 way finished....super easy - using velcro....my daughter found this and sent it to me with the following comment..."Do you think, maybe?" She will be surprised next weekend!
Thank you...looking forward to trying some of your other items.

saras said...

Today is my birthday! And I decided to make myself a gift! I had the perfect fabric and all the supplies! (Even did my very first magnetic closure! why did I think those were so difficult!)

Love the way this came together! Took most of the morning and loved every minute of it!

Thanks so much!

Анна said...

Hello Sewed in your purse a master class, though a bit Kriven'ko, maybe the first time. Very davolno, all painted in detail. Thank you very much. Interesting to see if this is my blog http://amignatenko.blogspot.com/

Sundance Kim said...

I stumbled on this tutorial a couple weeks ago and finally had the supplies gathered and time to make it today. I'm still learning a lot of sewing technique and jargon but was pleased with how easy the instructions were to follow. I can't wit to show friends and family what I made this weekend :)

texmex said...

I really enjoyed your tuto and made a little wallet with external simili leather. But as usual I cut some edges and the cards are slipping a little bit too fast out of their storage. I like the way to put it together and really want to thak you for showing it, your explanations are really clear.

Anonymous said...

so sweet

xo of Paris

Delphine said...

Pas aussi joli que le vôtre mais je l'ai bien copié quand même ;-)
Merci pour l'inspi!
http://lesbricolesdelaniece.wordpress.com/2012/08/12/porte-cartes-de-fidelite/
Je me suis permise de mettre un lien vers votre blog ...

Anonymous said...

This wallet was my first project... ever. The tutorial was very clear and easy to follow, I love my new wallet, thanks for sharing!

travis said...

oh lawd how i did try, mine camout with holes on each side and no bill thing lmao idk???

Toni M said...

CUTE wallet! This is just what I'm looking for - my husband likes to take me out on his motorcycle when we have our dates, and I need a cute little something to keep my things in. Thanks for sharing the tutorial!

Danika said...

Thanks for the easy-to-follow tutorial! I'm easing my way into sewing... and although it's got it's flaws, I think it came out pretty cute! I had a couple of problems, and my bottom card pocket is really shallow... but other than that, I'm pretty happy with it! =)

Melanie said...

wow! thats pretty cool!! thanks for sharing. :)
but i think its a bit too complicated for me. have to start with something easier.

Romina S. said...

I was looking for this! Thank you very much!!! C:

Nina said...

its amazing and i like the colours u choosed and for sure the snappy :)

greetings from germany

Unknown said...

This is just what I have been looking for. I am going on vacation next month and I don't want to take my large wallet and all my cards. I just need to add some sort of pocket for change.

Unknown said...

I am going on vacation next month and I don't want to take my big wallet with all my cards. This will be perfect for what I need. I just need to add a zippered pocket somehow for change.

Cucicucicoo said...

holy gosh, this is gorgeous! my wallet's falling apart, so i just might attempt it! like the commenter above me, i would also like to figure out a zippered/snapped coin pocket, but i'm sure it's doable! thanks so much for sharing the instructions! :) lisa

Kellie said...

i've been needing a new wallet. thanks for such a great tutorial!!

Unknown said...

I just made this wallet and have to say its very cute! Is a little tricky in some parts but definitely worth the few hours I put into it. Hopefully the next one I make will b easier since I now have experience ;-) Hehe. Thank u so much for the free tutorial!!

SRBBecker said...

LOVE this tutorial! Thank you so much. I just made my new wallet this a.m. My only issue (which isn't a big problem), is that the center (where you sew the liner to the credit card holder) is too thick and sticks out (in my opinion). What did I do wrong? I trimmed all seam allowances as much as I could.

Thank you again for this lovely tutorial. Now I'm off to make my cross-body satchel! Wish me luck :)

delectablespoonart said...

Love this wallet! It is difficult to stitch the outer edge when it is completed though. I added a Velcro change compartment on the outside. I measured a piece 9 by 5 inches, folded it in half, right sides facing each other and stitched two sides and turned it right side out. Then I added Velcro to one long side and added the other half of the Velcro to the outside of the outer piece and sewed down the change purse. All this was done before any assembly was started. Just make sure you attach it to the back panel side where the tab is so it isn't in the way when you snap it close. Hope that makes sense. I used my snap press to attach the snap. The male end is tucked inside the money holder and it helps hold down the fabric too. Nobody can see it unless they look in the money compartment. Looks like a lot of people will be getting wallets for Xmas this year!

The Thimbleberry Patch said...

This is a very nice project. I finished one very quickly and think I will add some quilting to the next one.

Thanks for sharing this!

Anonymous said...

This tute is AWESOME! Thank you so much for sharing your talant. I am new to sewing and your tutorial is easy to follow. I just got my 1st wallet sewn and it turned out wonderful. Have a great Turkey Day! zeb312@yahoo.com

Hanna said...

This is one great tutorial, very clear, easy to understand and written in a understandable, for a foreigner like me, language! Thank you very much! going to make this wallet for my sis as a Christmas gift :)

Danielle said...

I just made a Spiderman wallet for my son's birthday using your tutorial. I changed the measurements so it would fit in his pocket and it turned out great! Off to Hobby Lobby now so I can make myself one.

May said...

Thank you so much! My second project down! :D I did mess up and the tab somehow wound up on the right hand side... oops. I also forgot to put the velco on earlier than last and had to be creative on how to hide the sewing there, haha... but! A GREAT tutorial for a beginner who knows next to nothing about sewing!!! thanks again! <3

klyn said...

Thank you so much for sharing this great tutorial. I've been looking for one just like this. Can't wait to get started on it.

Shirley said...

Jodell-
I've made a couple of these wallets and have had some trouble fitting the lining in.
If I sew it according to the 1/2 " seam allowance, the main wallet is too big to fit inside (before it gets turned right side out).
If seam seams a bit smaller, then when it is turned the bill lining is too bunchy. Anyone else have same trouble?

MeetMrs.Robinson said...

Thanks so much for this. I have made a wallet for myself on a much simpler tutorial, but I am making one for a Christmas gift and this will give it a much crisper look! I also favorited you on etsy. Your clothes are beautiful. I hope my stitches stay as straight as yours.

Jodell said...

@ Shirley - It does get a bit thick with all those layers. A couple of things you might try:

1) cut your interfacing smaller, 8"x4", then center it on the back of the main wallet pieces. This should reduce much of the bulk on those edges.

2) Continue to use the 1/2" seam allowance, but then trim down the seam to 1/4" and clip corners after sewing.

Happy sewing!

Almaelou said...

I was so excited when I found this tutorial. I was going to make my husband a wallet! The tutorial was WONDERFUL! A word of caution: I used all duct cloth, canvas, and even put interfacing on the outside piece...way too thick! He will not use this wallet.

Laura V said...

This tutorial was Über helpful! I whipped one up for a last minute Christmas gift and even as a beginning sew-er I was able to get this done in no time at all. And it looks adorable! THANK YOU!

Judy Creats said...

Did I miss seeing the seam allowance guide?

Unknown said...

Thanks for sharing -great idea - have to give it a try:) regards from Norway:)

Jodell said...

@ Judy Creates - The seam allowance varies from 1/4" to 1/2", and is indicated on the picture when you enlarge it. The tab uses a 1/4". The main wallet uses a 1/2" (then you trim down to 1/4" after it's sewn to reduce bulk). Stay stitching the pocket is 1/4". Any topstitching is 1/8". Best of luck!

Judy Creats said...

Thanks, I completed the wallet it is really cute. I added the magnetic snap and determined that the snap side should be sewn on facing down. Also the coordinating snap should be centered about 2 inches down on the short side.

Unknown said...

Saw the wallet weeks before Christmas but just never got it done. Today I finished it in a little over 3 hours. Great Sunday project, thanks and love your site.

Anonymous said...

Easy instructions. I whipped out two of these with some scrap bull denim I had laying around. I'll definitely be making more of these as gifts.

Marla said...

Hi! I just wanted to say thanks and I made this wallet and posted it to my blog. The link is here: http://craftsewsweetly.blogspot.com/2013/01/mens-wallet.html

Patricia said...

Thank you for sharing your pattern. Will be adding a loop and ring and attaching it to my keys. Only take what I really need. Keys, ID, money. All else is just extra. :)

Unknown said...

Sweat idea!! I always have a hard time finding a wallet that I like so I'm going to start making mine. I already make most of my totes & make up bags why not my wallet. Thanks for such a great idea!!

misskim said...

I just finished making one of these adorable wallets and am super happy with it! I will be making more for sure! Thank you so much for a wonderful pattern!!

KaHolly said...

You're a genius. This project is next in line at my machine!! I've made the wallet with the openings facing toward the top, and yes, cards fall out easily. Can't wait to give this one a try!! ~karen

Nancy said...

Just made this today. Turned out great! Thank you so much!

Unknown said...

Cool iron dude! where'd you buy it? I'll pay you 5 bucks for it!

Anonymous said...

This is awesome! Can customize a wallet that will actually fit into my daughter's tiny little purses! Thanks soooo much for sharing your wonderful idea!

Finnegan Family said...

My daughter found your pattern on pintrest and had to try it out. After hers turned out so very cute, I had to make one. My daughter is 15 and enjoys sewing but has just really caught the bug. She followed your instructions and had no problems finishing it very quickly. Thanks for your creative blog.
Cathy

Anonymous said...

This is a great tutorial! thanks a lot! Id like to do this soon! :D

Anonymous said...

Anyone who has made this according to the pattern, what are the approximate dimensions of the finished wallet? I think I may want to scale it down some. How much of it could be tightened up and still fit the cards and bills? Thanks!

Jodell said...

@ Anonymous - The finished dimensions are 4"x4" when the wallet is closed. As for the card slots, you have about 1/4" total wiggle room (side to side), and about 1/2" vertical, so I wouldn't go smaller than 8.5"x4.75" when cutting your main outer piece and lining piece. As for the card slot piece, you'll want to keep the vertical spacing when creating the pockets, but the 1/2" wiggle room comes by shifting the pockets closer to the center fold of the wallet. (cut 4.75"x 19"). Hope this helps!

Angie said...

I need to pin this! ;)

Shara said...

Just made this today! Super easy to follow, love my new wallet, thanks for the awesome tutorial!

delectablespoonart said...

I love this wallet and made a bunch of them. Any suggestions how to keep the credit cards from sliding out so easily? They just glide on the fabric and slip out when I open the wallet. Née something with a rubber surface that has one side adhesive. Any ideas?

Laurynn Michelle said...

I just made this today! It was very simple and the tutorial was well put together :) Thank you so much for this post.

Jovy said...

I just finished this today! Thank you so much. Your tutorial is great. The instructions were clear and easy to follow.

Liberty said...

I just have to say, as a Boise-area native living in Utah for 10+ years now, seeing your Boise Co-Op card made me really happy! Looking forward to trying this tutorial.

romi said...

Thankyou very much for sharing ...this is an awesome tutorial :)

Amie said...

WONDERFUL tutorial! I just finished a wallet for my mom - she's been looking for something similar to buy and couldn't find the right thing in her price range. Mine is not nearly a "finished" looking as yours but that is completely due to my sewing skills. On my own I would never have attempted such an endeavor! I can't thank you enough!

Jenafaye said...

Thank you so much for posting this tutorial!! It was great!!!!
I made on for myself. If you would like to see my wallet, check my blog @ http://zeeramblingsofacatlady.blogspot.com/2013/06/a-snap-wallet.html

Men's Wallets said...

Great peaces of work. I love it. thanks for sharing a great tutorial..

Unknown said...

Delightful share, Jodell...wonderful inspiration. will email u what I'm able to produce from your guidelines,k?

Chic Crafter said...

You are so awesome, very easy to follow step-by-step instructions. Thank you for inspiring me artful muscles.

All the best!
www.craftmenot.blogspot.com

Faith said...

I'd pinned this a while ago and finally got around to making it today, its super cute and goes nicely with the cross body bag I made last month

Pamea Hansen said...

Love it! Thank you so much!

Sarah said...

I just made two of these! Super easy and comes out so nice!

Janet said...


Thanks for the tutorial. These are so easy to make.

Anonymous said...

Hi, what kind of stabilizer would you recommend using? Would Pellon 71F be too thick? Thanks for the tutorial.

Jodell said...

@Anonymous - I use Pellon fusible mid-weight, but the heavy Pellon will be great if it's done right. If you do decide to use the heavy weight, then I have a two suggestions:

1. only use the heavy interfacing on the outer piece. Use light or mid weight for the inner piece.

2. cut your interfacing minus the seam allowance... so cut it 8"x4" - then center on the back side of your 9"x5" outer piece and fuse. This will avoid the extra bulk on the seams.

Anonymous said...

Hi, thanks for your reply about stabilizer. May I have another question (can you tell I am getting ready to make this?) -- you don't laminate your fabric, right? Are you concerned that the wallet will get dirty over time? would you wash it? I am wondering if I should apply iron-on vinyl before sewing.

Thank you so much.

Jodell said...

@Anonymous - I haven't tried making this wallet with laminated cotton. It would certainly keep it cleaner :) I haven't tried washing my cotton wallet yet, but I imagine you could as long as you hand wash, cold water, and lay flat to dry.

If you decide to try laminate cotton or oil cloth, just keep in mind to "finger press" your seams and avoid ironing so the laminate does not melt. I would also only do laminated cotton on the outer layer and leave the inside layers and pocket regular cotton. Good luck!

Cealleadh said...

I made a purse yesterday and today using this tutorial I made a matching wallet. I love it!
The tutorial was easy to follow and the wallet is fantastic with just the right amount of pockets! Thank you for sharing it!

Unknown said...

This is a really good tutorial. The type that makes me think I can sew like a pro! Thanks for posting this, I will be selling a finished wallet on my etsy shop giving you full credit and encouraging others to visit your site so they can also get the satisfaction of finishing an awesome little wallet! Honestly, this is by far, one of my favorite patters EVER. :)

Unknown said...

Great tutorial, great pattern. Thanks so very much for sharing it!

Unknown said...

Thank you so much for sharing.Loved !

Anonymous said...

Cute wallet! Would you mind telling me what industrial snap press you use? I'm having trouble figuring out which ones can use these kinds of snaps and not just the snaps that go on diapers. Thanks!

Jodell said...

@Anonymous - I purchased my snap press and die set years ago from here http://www.verybaby.com/snap-press/.

I have the size 20 die set and use polyacetal resin snaps. I have found that the snaps sold from the snap store are much better quality than from verybaby.com. Here is their website: www.thesnapstore.com

I have a couple of friends that also use the snap press from the snap store and love it.

It's a bit of a big purchase, and I initially bought it to sew cloth diapers. All my kids are out of diapers now, but I still love and use my snap press a ton :)

Unknown said...

This was a great tutorial. Thank you for sharing, I love my new wallet.

Jessica said...

Just made one of these, thanks for the super simple tutorial! It was so quick to sew! I changed it up a bit and added a coin pocket instead of one of the rows of credit card slots. Thanks! Mine is not so cute as yours, of course, but if you'd like to see it, its here: http://monkeyshiners.blogspot.com/2013/11/quick-wallet-for-l.html

I blog for fun and posterity's sake so my pics are terrible as I don't put a lot of time in it. :)

Anonymous said...

Super cute! Planning to make this either this week or next week! Thanks for the tutorial!

ayallum said...

Thank you!!!! Someone actually put steps how to make a wallet! I have been looking for a long time for steps to make my own wallet! Thank you again

Cela said...

Thank you! Your tutorial just helped me figure out something I've wanted to incorporate into my own wallets! Thank you so much!

Polished Pisces said...

Fun tutorial thanks for sharing :)! I skipped the second card slot piece and put in an invisible zipper pocket instead.

LadyFville said...

AWESOME!! Due to disability, my 'regular' handbag has become unmanageably heavy - so I just made a lightweight bag of my own design (upholstery fabric)- but my leather wallet weighs a TON before I even put anything in it!! I'll be using your design with the possible addition of a another card wing to hold more plastic - Thank you for your hard work producing this!

Iwonka said...

Very interesting tutorial. Nice idea with a ribbon. I think, I will try to sew next wallet myself.

Nic said...

Thanks heaps for the tutorial! It was super easy to follow and even though I'm still a beginner, took me about 3 hours all up. Next time I'll make the interfacing smaller because it was difficult to press flat oh and I added velcro under one of the pocket pieces, attached to the inner main, to make a coin compartment too (Australia uses a lot of coins!). I love that minus the small piece for the tab, you could make out of a single fat quarter! Thanks again :)

Anonymous said...

hi thanks for the tutorial! may i ask how you do the tab? because i put the interfacing on and sewed it in place but it seems too thick to be able to turn it the right side out after i have stitched it? thanks

Unknown said...

When doing the final top stitching on the sides and bottom, are you leaving the bill pocket inside so it gets stitched? or do I pull the bill liner out and topstitch just the wallet?
Thanks great tutorial...next time follow tips about interfacing :)

Jodell said...

@Fiona Phelan - I leave the liner in when doing the final topstitching on the sides and bottom. Although, the topstitching may not necessarily catch the lining, which is okay :)

Anonymous said...

How did u know where to attach the metal snap so both sides would meet correctly?

ofel said...

thank you for this tutorial. i love the way my little wallet turned out !

Kathleen said...

Awesome! Been wanting a new wallet. Excited about making this

Anonymous said...

This worked perfectly! My nephew and I put it together in only 2 hours! Thanks so much!

CCinMesaAZ said...

I am new to sewing and have a question about the tab. You say to cut a piece for the tab that is square 3 1/2 x 3 1/2 I believe and in the picture with all your cut pieces it is square but in the next picture it is a rectangle and seems larger than what you say to cut it. Could you explain to me what I am not seeing :) Thank you... It is adorable!!

Jodell said...

@Carin Carlton - For the tab, you fold the 3 1/2" square in half with the right-side together. Then you sew around one of the short sides and the open long side with a 1/4" seam allowance. You should have one short side unsewn... that's where you will turn the tab right-side out, press and then top-stitch it so it's pretty. The finished dimensions of the sewn tab are approximately 3 1/4" long and 1 1/2" wide. I hope this helps :)

Unknown said...

I feel pretty dumb for having to ask this, but is it in inches or centimeters? Thanks!

Jodell said...

@Sarah Elliott - Everything is in inches :)

Ruby said...

Thank you for the great tutorial. It is very well written
with great photos and instructions. Thank you for sharing!

Laura S said...

If I want to use a snap tool, should I add the snap to the body before I add the pockets?

Jodell said...

@Lauren - You may add the snap before, but I just add it at the end by spreading open the bill fold. (the snap will go on the opposite side of the pockets).

Unknown said...

This is awesome!! Thank you for making this free!!! My wallet turned out so cute, this is just what I needed!!!

Misty Guye said...

As a rookie sewer, I have a couple of questions. I've watched tutorial after tutorial and take Craftsy class after class, but these tutorials/classes never address things such as, needle size, stitch, how to keep the fabric from moving when sewing, etc. So what size needle and stitch should I use? I'm using stabilized quilting fabric (cotton). Also, even when pinning, often times, my fabric moves creating uneven sides. I'm using a zig zag foot/standard and tension set to 3 ( maybe, 2). Is there a trick to keeping things lined up?

Jodell said...

@Misty Guye - for needle size, I prefer Universal 80/12 (Schmetz Brand are my favorite). As for your fabric layers shifting, pinning is good, but it also sometimes help to hold fabric a certain way as you sew to keep them all together (especially when you have heavier layers that want to misbehave). With your left hand, grip the just sewn fabric, and with your right hand grip about 4-6 inches of the unsewn part. Using this grip, pull the fabric layers taut as you sew. However, it is important that while you are holding the fabric taut, you do not force (pull) while you sew. The machine should be doing the feeding, while you just "guide" the fabric while holding it tight. I hope this makes sense :) Good luck!

howtotrainachihuahua said...

I love the tutorials on wallet, just curious about the durability of the wallet.

P.S. I enjoyed the tutorial :)

Caitlin B. said...

Thank you for the tutorial! It was easy to make, mostly. I had some difficulties with it be very thick in some areas and I had some difficulties with that.

Unfortunately, I found this isn't the style of wallet for me. It seems a bit too big and a little loose. Good practice though!

McMGrad89 said...

Thanks. My daughter looks forward to making it.

Hope said...

Great tutorial! Just whipped up one with some scraps of material. Used denim for the outer. Quilting cottons for the others. If I were to use denim again, I think I'd still use interfacing/stabilizer. But cutting it inside the seam allowance (if that makes any sense) so those seams don't get any bulkier. :)

Beeje said...

Like Shirley, I followed all cutting/seam allowances but when I insert the completed outer section into the liner, it sticks out a good half inch. Even if I reduce the seam along the bottom of the liner it's not going to work, so I have to cut more fabric. Thankfully I have extra, but I wish I could figure out what went wrong. Otherwise it seems to be looking great; just hoping I can fix this and finish it up before I lose patience and/or enthusiasm!

MsRenay said...

Loved this pattern. Not as intimidating as it looks. I will be making a bunch of these for friends and family. Thanks for a great tutorial. S

Unknown said...

Love this type of wallet - made one with scraps to try it out and other than the sewing of the lining it was a breeze"